Форум MySQL

При кодировке latin1, utf8 mysql запускается, при других нет. Пишет
C:\MYSQLS~1.0\bin\mysql.exe: Character set 'cp1251' is not a compiled character
set and is not specified in the 'C:\mysql\\share\charsets\Index.xml' file
Как это победить?

Скачать другой клиент...
или поправить файл C:\mysql\\share\charsets\Index.xml...

Скачать другой клиент...
Откуда скачать? В установочном архиве только этот.
Пробовал версии 5.0.18, 5.024а результат тот-же.

или поправить файл C:\mysql\\share\charsets\Index.xml...
То что надо поправить Index.xml...и так потятно из сообщения, а как это сделать не понятно!?,-
если знаете пожалуйста подскажите.

У вас конфигурационный файл my.ini как выглядит?

Выглядит вот так:

# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
# Installation Instructions
# ----------------------------------------------------------------------
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option
# "--defaults-file".
#
# To run run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]

port=3306

[mysql]

default-character-set=cp1251


# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld]

# The TCP/IP Port the MySQL Server will listen on
port=3306


#Path to installation directory. All paths are usually resolved relative to this.
basedir="C:/MySQL Server 5.0/"

#Path to the database root
datadir="C:/MySQL Server 5.0/Data/"

# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=cp1251

# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB

# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100

# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0

# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256

# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=26M


# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8

#*** MyISAM Specific options

# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_max_extra_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=52M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=40M

# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K


#*** INNODB Specific options ***


# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb

# Additional memory pool that is used by InnoDB to store metadata
# information. If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS. As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system. Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=77M

# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=39M

# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=8

Директиву

default-character-set=cp1251

следует переместить из секции [mysql] в секцию [mysqld]

Переместил не помагает!

Сервер перезапускали?

Перезапускал и сервер и компютер,- не помогает. Вычитал в инструкции что все исполняемые файлы должны быть прекомпилированы с учетом национальной кодировки, но как это сделать толком не описано, и как русифицировать MySql клиент и всю остальную начинку не знаю. Согласно инструкции делаю все правильно, согласно советов тоже правильно, перечитал много страниц форума, перепробовал все советы, а оно не работает...

Сейчас можно руссифицировать из без перекомпиляции (если дистрибутив с mysql.com взят) - у вас MySQL откуда? С официального сайта или входит в состав какого-то дистрибутива?

Взята из официального сайта была 5.0.18 обновил на 5.0.24 все равно не помогает. Если знаете как русифицироваить пожалуйста подскажите. После всех експерементов понял, что вся проблема в русификации, но как это сделать не знаю.

А у вас my.ini где лежит?

c:\Program Files\MySQL\MySQL Server 5.0\
устанавливал также и в корневой каталог С:\
и так c:\MySQL Server 5.0\
результат тот же, - с русским дружить не хочет

Задача решается очень просто. Главное внимательно читать, что система пишет в ошибке. А пишет она то, что не может найти файл по пути c:\mysql\... и т.д. А вы установили SQL совсем в другой каталог. В этом и проблема. Что бы не переинсталировать все SQL надо сделать следуюющее. На диске "С" создаете новую папку "mysql" в эту папку копируете полностью папку "share" со всеми вложенными в нее папками и файлами из того каталога куда вы установили свой SQL и все буде работать нормально. Удачи в работе.

У меня та же самая проблема и путь указан правильно к кодировки, и все советы вышеперечисленые попробывала, а все равно не работает...

Я сегодня купил "Самоучитель MySQL 5" Кузнецова и столкнулся с теми же проблемами. Потратил часа полтора пока не додумался найти зайти на эту конференцию и почитать варианты решения проблемы. В итоге у меня заработали два варианта - как предлагается предыдущим коллегой создать каталог c:\mysql\share и скопировать туда все файлы и каталоги из аналогичного каталога (c:\mysql5\share\*.*). Но проще мне показалось при установке когда Кузнецов рекомендует сменить имя каталога на более короткий сразу написать просто c:\mysql\ без всяких указаний на номер версии продукта. Видимо, программе очень нравится именно такой короткий каталог. :)) По крайней мере у меня так заработало.

P.S. для справки - у меня ноутбук с Windows XP Home Edition SP2 Russian (со всеми
актуальными патчами)